navigationGo.pngQuick Navigation
allprojects32.pngAll projects
hardware32.pngHardware
links32.pngLinks

favoriteStar32.pngTop projects
Alan numitron clock
Clapclap 2313/1386
SNES Pi Webserver
USB Volume/USB toys
Smokey amp
Laser cutter
WordClock
ardReveil v3
SNES Arcade cabinet
Game boy projects
cameleon
Home Presence Detector

github32.pngGitHub
AlanFromJapan

navigationMail.pngContact me

alanfjmail.png
3flags.pngWho's Alan?


Akizukidenshi
Elec-lab
Rand Nerd Tut
EEVblog
SpritesMods
AvrFreaks
Gameboy Dev
FLOZz' blog
Switch-science
Sparkfun
Suzusho
Datasheet Lib
Reddit Elec
Ermicro
Carnet du maker (fr)

repair - nintendo ds battery-less

Last update: Thu Jan 18 13:13:25 2024
nintendo-game-boy-icon.pngSee my other Gameboy related pages
Bought a bunch of GameBoy/NDS last year 2023, and started fixing a few for the practice and for the fun. One must have been stored in the dirt or something approaching, how full of dirt (no better word) there was even inside.
I managed to make it partially work again, here's what I did (Jan2024).

Presentation

Initial status

  • VERY dirty, like old sawdust inside and dirty as hell outside
  • Battery dead (measures 0 volt)
  • GBA port dead (partially covered in that beautiful blue copper oxide)
  • NDS port ok!
  • Screen has some dead LIGHT rows (a few on each screen) but image pixels are ok, so usable. Touch is ok.
  • Power port oxydized
  • Action plan

    Battery is dead, not planning to spend on a new one. But problem is that NDS will NOT boot on wallwart power if it doesn't detect a battery (and a healthy one please, less than 3.6v undercharge protection will kick in). Considering the power port was goneski, and that seeing its overall shape it will be "for practice" only, I decided to make it a wallwart only model by simulating a battery (5v to 3.7v buck).

    1. Bye battery
    2. Desoldered the old dead power connector, and then 2 ferrites (wasted space)
    3. Desoldered the battery connector
    4. Stuck a DC-DC buck converter (a cheapo MH-MINI-360) with tape
    5. Stuck a USB-C female connector module where the power was with LOTS of (way too much) epoxy
    6. Dremeled a hole where the battery was in the back cover to allow for the buck converter and cables
    7. Dremeled out all the excess epoxy and USB-C module board so I could put back the back cover.

    Pictures

    Before butchering it
    Power connector, ferrites x2, battery connector: bye bye.

    With the buck converter.

    Had to dremel the sh*t of the USB-C board to let the lid close, but in the end it did.

    WIth the back cover installed (the battery covers all that)

    It works!
    All content on this site is shared under the MIT licence (do what u want, don't sue me, hat tip appreciated)
    electrogeek.tokyo ~ Formerly known as Kalshagar.wikispaces.com and electrogeek.cc (AlanFromJapan [2009 - 2025])